Port Forwarding the Netcomm NB2800 Router for Qsee QSD2304C4-320


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Netcomm Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Netcomm > NB2800 > Qsee QSD2304C4-320

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Netcomm NB2800 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

192.168.1. <-- Don't Skip This Step!

Login to the Netcomm NB2800 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Netcomm NB2800 Router IP Address

It's ok if you don't know your Netcomm NB2800 router's internal IP address. You can find it by doing one of the following:

Login To The Netcomm NB2800 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Netcomm NB2800 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Netcomm NB2800 router. By default the IP address should be set to 192.168.1.1.

Netcomm NB2800 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Netcomm NB2800 Router Username is: blank

The Default Netcomm NB2800 Router Password is: admin


Click the Ok button to log in to your Netcomm NB2800 router.


Default Usernames and Passwords for other Netcomm Routers

Please visit our Default Netcomm Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Netcomm NB2800 router username and password, use our How to Reset a Router Password guide to set your Netcomm NB2800 router back to its factory settings.


How to Port Forward Qsee QSD2304C4-320 on the Netcomm NB2800


Having trouble forwarding ports on the Netcomm NB2800?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Netcomm NB2800 router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select System

  • Select Network

  • Put a check in the DHCP box.
  • Select OK.

  • Exit out to the live cameras by pressing the ESC button on the DVR.


Power Cycle the DVR

  • Remove the power cable from the back of the dvr.
  • Wait 20 seconds.
  • Plug in the power cable.


Identifying the IP address

  • Press Menu
  • Select Info
  • Select Network

  • Write down the IP address, subnet mask & gateway found on your info network screen.



Assign a Static IP

  • Press Menu
  • Select System

  • Select Network

  • Remove the check from the DHCP box.
  • Input the same IP address, subnet mask & gateway - (you wrote down earlier).

  • Select ok

Netcomm NB2800 Router Port Forwarding Screenshots

Now that you are logged in to your Netcomm NB2800 router you should see the following:

Netcomm NB2800 Screenshot 2

Click the Virtual Server link near the left of the page.

Netcomm NB2800 Screenshot 3

Forward Ports 80 on the Netcomm NB2800

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Qsee QSD2304C4-320 requires you to forward the following ports: 80,2000. Go ahead and enter the settings shown above into the Virtual Server menu.

Incoming PortsRedirect IP Address
~192.168.2.


Forward Ports 2000 on the Netcomm NB2800

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings now.

Incoming PortsRedirect IP Address
~192.168.2.

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!


Test if Your Ports are Open

Now that you have forwarded ports for Qsee QSD2304C4-320 on the Netcomm NB2800 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Netcomm NB2800 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Netcomm Router Screenshots. We have the Internets largest collection of Router Screenshots.