To setup port forwarding on the Netcomm NB6W router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Netcomm NB6W router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Netcomm NB6W router. By default the IP address should be set to 192.168.1.1.
Click the Ok button to log in to your Netcomm NB6W router.
Please visit our Default Netcomm Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Netcomm NB6W router username and password, use our How to Reset a Router Password guide to set your Netcomm NB6W router back to its factory settings.
Now that you are logged in to your Netcomm NB6W router you should see the following:
Click the Advanced button near the top of the page.
Click the Virtual Server link near the left of the page.
You should now see a new menu. In this new menu, click Port Forwarding.
Click the Add button near the right of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 MLB Front Office Manager requires you to forward the following ports: 3074. Go ahead and enter the settings shown above into the Port Forwarding menu.
|From Internet Host IP Address:|
|Forward to Internal Host IP Address:|
|Protocol||External Packet||Forward to Internal Host|
|Port Start||Port End||Port Start||Port End|
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for XBOX360 MLB Front Office Manager on the Netcomm NB6W you should test to see if your ports are forwarded correctly.