Port Forwarding the Netcomm NP803n Router for Final Fantasy XI - PS2

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Netcomm NP803n Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Netcomm > NP803n > Final Fantasy XI - PS2

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Netcomm NP803n router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Netcomm NP803n Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Netcomm NP803n Router IP Address

It's ok if you don't know your Netcomm NP803n router's internal IP address. You can find it by doing one of the following:

Login To The Netcomm NP803n Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Netcomm NP803n Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Netcomm NP803n router. By default the IP address should be set to

Netcomm NP803n Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Netcomm NP803n Router Username is: admin

The Default Netcomm NP803n Router Password is: admin

Click the Ok button to log in to your Netcomm NP803n router.

Default Usernames and Passwords for other Netcomm Routers

Please visit our Default Netcomm Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Netcomm NP803n router username and password, use our How to Reset a Router Password guide to set your Netcomm NP803n router back to its factory settings.

How to Port Forward Final Fantasy XI - PS2 on the Netcomm NP803n

Having trouble forwarding ports on the Netcomm NP803n?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Netcomm NP803n Router Port Forwarding Screenshots

Now that you are logged in to your Netcomm NP803n router you should see the following:

Netcomm NP803n Screenshot 2

Click the Advanced link near the left of the page.

Netcomm NP803n Screenshot 3

This router has two different sections that allow you to forward ports. One section allows you to forward a range of ports, and the other allows you to forward a single port. To forward a range of ports, click Port map.. To forward a single port, click Port fw..

Netcomm NP803n Screenshot 4

Forward Ports 1024-65535 on the Netcomm NP803n

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Final Fantasy XI - PS2 requires you to forward the 1024-65535 ports. Go ahead and enter the settings shown above into the Port map. or Port fw. menu and then click Add.

Enable Port Mapping  
Description :
Local IP :
Protocol :
Port Range : ~

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for Final Fantasy XI - PS2 on the Netcomm NP803n you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Netcomm NP803n Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Netcomm NP803n Router Screenshots. We have the Internets largest collection of Router Screenshots.