To setup port forwarding on the Netcomm NetcommNB3 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Netcomm NetcommNB3 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Netcomm NetcommNB3 router. By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Netcomm NetcommNB3 router.
Please visit our Default Netcomm Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Netcomm NetcommNB3 router username and password, use our How to Reset a Router Password guide to set your Netcomm NetcommNB3 router back to its factory settings.
Before we can forward ports for mIRC, we need to set the ports that Mirc uses. Here is a brief walkthrough on how to do that. Go ahead and open up mIRC.
Click View in the menu at the top of your screen. In the list that drops down click Options.
On the left hand side of this new page click the plus sign in front of Connect. In the list that drops down click the Options link. There should be an Advanced button on this page. Go ahead and click it now.
Make sure there is a checkmark in the DCC checkbox. We will be using 10051 through 10070 as our port range in this example, but you can choose any port range you like. If you decide to choose another port range, you will need to forward the ports you chose instead of 10051 to 10070. The port range we are using in this example gives us plenty of ports for DCC file transfers. Once you have set the ports to use click the OK button all the way out to mIRC's main menu.
Now that you are logged in to your Netcomm NetcommNB3 router you should see the following:
Click the Services button near the top of the page.
Select NAT Rule Entry from the NAT Options drop down box.
Click the Add button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. mIRC DCC - IRC DCC requires you to forward the 1024-5000 ports. Go ahead and enter the settings shown above into the NAT Rule - Add menu and then click Submit.
|Nat Rule Information|
|Local Address From:|
|Local Address To:|
|Global Address From:|
|Global Address To:|
|Destination Port From:|
|Destination Port To:|
Click the Close button near the bottom of the page.
Click the IP Filter link near the top of the page.
Select Low from the Security Level drop down box.
Select Accept from the Public Default Action, Private Default Action and DMZ Default Action drop down box.
Click the Submit button near the bottom of the page.
Click the Admin button near the top of the page.
You should now see a new menu. In this new menu, click Commit & Reboot.
Click the Commit button near the bottom of the page.
Click the Reboot button near the bottom of the page.
And that is it! You are done!
Now that you have forwarded ports for mIRC DCC - IRC DCC on the Netcomm NetcommNB3 you should test to see if your ports are forwarded correctly.