Port Forwarding the Netcomm nb1 Router for QNAP TS-100


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Netcomm Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Netcomm > nb1 > QNAP TS-100

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Netcomm nb1 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the Netcomm nb1 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Netcomm nb1 Router IP Address

It's ok if you don't know your Netcomm nb1 router's internal IP address. You can find it by doing one of the following:

Login To The Netcomm nb1 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Netcomm nb1 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Netcomm nb1 router. By default the IP address should be set to 192.168.1.1.

Netcomm nb1 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Netcomm nb1 Router Username is: admin

The Default Netcomm nb1 Router Password is: admin


Click the Log In button to log in to your Netcomm nb1 router.


Default Usernames and Passwords for other Netcomm Routers

Please visit our Default Netcomm Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Netcomm nb1 router username and password, use our How to Reset a Router Password guide to set your Netcomm nb1 router back to its factory settings.


How to Port Forward QNAP TS-100 on the Netcomm nb1


Having trouble forwarding ports on the Netcomm nb1?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Netcomm nb1 router to save you time and hassle.

Netcomm nb1 Router Port Forwarding Screenshots

Now that you are logged in to your Netcomm nb1 router you should see the following:

Netcomm nb1 Screenshot 2

Click the Advanced button near the top of the page.

Netcomm nb1 Screenshot 3

Click the Port Forwarding link near the left of the page.

Netcomm nb1 Screenshot 4

Click the Custom Port Forwarding link near the right of the page.

Netcomm nb1 Screenshot 5

Forward Ports 21-22 on the Netcomm nb1

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QNAP TS-100 requires you to forward the 21-22,25,80,443,445,873,3306,6881-6999,8080,9000,13131,55536-56559 ports. Go ahead and enter the settings shown above into the Custom Port Forwarding menu and then click Apply.

Custom Port Forwarding
Connection: Enable:
Application: Protocol:
Source IP Address: Source Netmask:
Destination IP Address: Destination Netmask:
Destination Port Start: Destination Port End:
Destination Port Map:    


Forward Ports 25 on the Netcomm nb1

You should see another page of settings that need to be entered into one of the blank lines on your routers Custom Port Forwarding page. Go ahead and enter those settings and then click Apply.

Custom Port Forwarding
Connection: Enable:
Application: Protocol:
Source IP Address: Source Netmask:
Destination IP Address: Destination Netmask:
Destination Port Start: Destination Port End:
Destination Port Map:    


Forward Ports 80 on the Netcomm nb1

You should see another page of settings that need to be entered into one of the blank lines on your routers Custom Port Forwarding page. Go ahead and enter those settings and then click Apply.

Custom Port Forwarding
Connection: Enable:
Application: Protocol:
Source IP Address: Source Netmask:
Destination IP Address: Destination Netmask:
Destination Port Start: Destination Port End:
Destination Port Map:    


Forward Ports 443 on the Netcomm nb1

You should see another page of settings that need to be entered into one of the blank lines on your routers Custom Port Forwarding page. Go ahead and enter those settings and then click Apply.

Custom Port Forwarding
Connection: Enable:
Application: Protocol:
Source IP Address: Source Netmask:
Destination IP Address: Destination Netmask:
Destination Port Start: Destination Port End:
Destination Port Map:    


Forward Ports 445 on the Netcomm nb1

You should see another page of settings that need to be entered into one of the blank lines on your routers Custom Port Forwarding page. Go ahead and enter those settings and then click Apply.

Custom Port Forwarding
Connection: Enable:
Application: Protocol:
Source IP Address: Source Netmask:
Destination IP Address: Destination Netmask:
Destination Port Start: Destination Port End:
Destination Port Map:    


Forward Ports 873 on the Netcomm nb1

You should see another page of settings that need to be entered into one of the blank lines on your routers Custom Port Forwarding page. Go ahead and enter those settings and then click Apply.

Custom Port Forwarding
Connection: Enable:
Application: Protocol:
Source IP Address: Source Netmask:
Destination IP Address: Destination Netmask:
Destination Port Start: Destination Port End:
Destination Port Map:    


Forward Ports 3306 on the Netcomm nb1

You should see another page of settings that need to be entered into one of the blank lines on your routers Custom Port Forwarding page. Go ahead and enter those settings and then click Apply.

Custom Port Forwarding
Connection: Enable:
Application: Protocol:
Source IP Address: Source Netmask:
Destination IP Address: Destination Netmask:
Destination Port Start: Destination Port End:
Destination Port Map:    


Forward Ports 6881-6999 on the Netcomm nb1

You should see another page of settings that need to be entered into one of the blank lines on your routers Custom Port Forwarding page. Go ahead and enter those settings and then click Apply.

Custom Port Forwarding
Connection: Enable:
Application: Protocol:
Source IP Address: Source Netmask:
Destination IP Address: Destination Netmask:
Destination Port Start: Destination Port End:
Destination Port Map:    


Forward Ports 8080 on the Netcomm nb1

You should see another page of settings that need to be entered into one of the blank lines on your routers Custom Port Forwarding page. Go ahead and enter those settings and then click Apply.

Custom Port Forwarding
Connection: Enable:
Application: Protocol:
Source IP Address: Source Netmask:
Destination IP Address: Destination Netmask:
Destination Port Start: Destination Port End:
Destination Port Map:    


Forward Ports 9000 on the Netcomm nb1

You should see another page of settings that need to be entered into one of the blank lines on your routers Custom Port Forwarding page. Go ahead and enter those settings and then click Apply.

Custom Port Forwarding
Connection: Enable:
Application: Protocol:
Source IP Address: Source Netmask:
Destination IP Address: Destination Netmask:
Destination Port Start: Destination Port End:
Destination Port Map:    


Forward Ports 13131 on the Netcomm nb1

You should see another page of settings that need to be entered into one of the blank lines on your routers Custom Port Forwarding page. Go ahead and enter those settings and then click Apply.

Custom Port Forwarding
Connection: Enable:
Application: Protocol:
Source IP Address: Source Netmask:
Destination IP Address: Destination Netmask:
Destination Port Start: Destination Port End:
Destination Port Map:    


Forward Ports 55536-56559 on the Netcomm nb1

You should see another page of settings that need to be entered into one of the blank lines on your routers Custom Port Forwarding page. Go ahead and enter those settings and then click Apply.

Custom Port Forwarding
Connection: Enable:
Application: Protocol:
Source IP Address: Source Netmask:
Destination IP Address: Destination Netmask:
Destination Port Start: Destination Port End:
Destination Port Map:    


Forward Ports 6881-6999 on the Netcomm nb1

You should see another page of settings that need to be entered into one of the blank lines on your routers Custom Port Forwarding page. Go ahead and enter those settings and then click Apply.

Custom Port Forwarding
Connection: Enable:
Application: Protocol:
Source IP Address: Source Netmask:
Destination IP Address: Destination Netmask:
Destination Port Start: Destination Port End:
Destination Port Map:    
Netcomm nb1 Screenshot 4

Select the applications you just created in the Available Rules list, then click the Add > button to move them to the Applied Rules box.

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!


Test if Your Ports are Open

Now that you have forwarded ports for QNAP TS-100 on the Netcomm nb1 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Netcomm nb1 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Netcomm Router Screenshots. We have the Internets largest collection of Router Screenshots.