Port Forwarding the Netgear CG814W Router for QSee QR4074-418-3

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Netgear Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Netgear > CG814W > QSee QR4074-418-3

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Netgear CG814W router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.0. <-- Don't Skip This Step!

Login to the Netgear CG814W Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Netgear CG814W Router IP Address

It's ok if you don't know your Netgear CG814W router's internal IP address. You can find it by doing one of the following:

Login To The Netgear CG814W Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Netgear CG814W Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Netgear CG814W router. By default the IP address should be set to

Netgear CG814W Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Netgear CG814W Router Username is: admin

The Default Netgear CG814W Router Password is: password

Click the Ok button to log in to your Netgear CG814W router.

Default Usernames and Passwords for other Netgear Routers

Please visit our Default Netgear Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Netgear CG814W router username and password, use our How to Reset a Router Password guide to set your Netgear CG814W router back to its factory settings.

How to Port Forward QSee QR4074-418-3 on the Netgear CG814W

Having trouble forwarding ports on the Netgear CG814W?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select Network
  • Make sure Type is set to DHCP

  • Select Apply
  • Select Exit
The DVR will reboot & pick up an ip address from the router.

Identifying the IP address

  • Press Menu
  • Select Network
  • Write down the ip address, subnet mask & gateway.

Assign a Static IP

  • Change Type to Static
  • Input the same ip address, subnet mask & gateway - (you wrote down earlier).

  • Select Apply
  • Select Exit
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.

Netgear CG814W Router Port Forwarding Screenshots

Now that you are logged in to your Netgear CG814W router you should see the following:

Netgear CG814W Screenshot 2

Click the Port Forwarding link near the left of the page.

Netgear CG814W Screenshot 3

Forward Ports 80 on the Netgear CG814W

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QR4074-418-3 requires you to forward the 80,9000 ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Add.

Name Start Port End Port Protocol Local IP Address

Forward Ports 9000 on the Netgear CG814W

You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding page. Go ahead and enter those settings and then click Add.

Name Start Port End Port Protocol Local IP Address

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for QSee QR4074-418-3 on the Netgear CG814W you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Netgear CG814W Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Netgear Router Screenshots. We have the Internets largest collection of Router Screenshots.