Login To The Netgear DG824M Router Using Your Web Browser
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Netgear DG824M router.
By default the IP address should be set to 192.168.0.1.
You should see a box prompting you for your username and password. Enter your username and password now.
The Default Netgear DG824M Router Username is: admin
The Default Netgear DG824M Router Password is: password
Click the Ok button to log in to your Netgear DG824M router.
Default Usernames and Passwords for other Netgear Routers
If you can't login to your router because you forgot your Netgear DG824M router username and password, use our
How to Reset a Router Password guide to set your
Netgear DG824M router back to its factory settings.
How to Port Forward Foscam FI8918W on the Netgear DG824M
Having trouble forwarding ports on the Netgear DG824M?
If you are having trouble with this guide, then perhaps PFConfig may be your solution.
PFConfig is a software tool that will automatically forward ports for your Netgear DG824M router to save you time and hassle.
Netgear DG824M Router Port Forwarding Screenshots
Now that you are logged in to your Netgear DG824M router you should see the following:
Forward Ports 80 on the Netgear DG824M
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Foscam FI8918W requires
you to forward the 80 ports. Go ahead and enter the settings shown above into the Port Range menu and then click Next then Close.
Under Security in the left hand menu click Services. You should see the following menu.
Click Add a Custom Service
Go ahead and name your service. It doesn't really matter what the name is, but something easy to remember would be good. Select tcp or udp under type. If you are unsure of the type just select both. Last put in the Start and Finishing port numbers. If the service only requires one port, put that port number in both the start and the finish box. You may need to setup multiple services, depending upon the number of ports/port ranges the software you want to run requires. Click Apply when you have finished.
Now we need to go to the second section to continue setting up our port forwarding. Under Security in the left hand menu click Rules. Once again you should see the following menu.
Go ahead and click Add in the Outbound or Inbound services section. If you are unsure whether the program you are using will use these ports for inbound or outbound traffic, repeat steps 7 through 9 for both Inbound and Outbound.
Send to LAN Server
Select the service we previously created. Action should be set to ALLOW always. Enter the ip address you want to forward these ports to in Send to LAN Server. If you are forwarding ports so you can run a program on your computer, you should enter the your computers ip address into this box. Wan Users should be set to Any, unless you want to limit who you want to connect to these ports. This would be useful, lets say, if you only wanted your office computer to be able to ftp into your home computer. In that case you would put your office computers ip address in both the start and finish box. Generally log should be set to never, unless of course you want to create a log of network activity.
When you are finished with that configuration go ahead and click Apply.
And that is it! You are done!
Test if Your Ports are Open
Now that you have forwarded ports for Foscam FI8918W on the Netgear DG824M you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Open Port Check tool.
Our Open Port Check tool is the only online port checking tool with Guaranteed Results.