If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.
You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.[an error occurred while processing this directive]
To setup port forwarding on the Netgear DG934G router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Netgear DG934G router's internal IP address. You can find it by doing one of the following:
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Netgear DG934G router. By default the IP address should be set to 192.168.0.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Netgear DG934G router.
Please visit our Default Netgear Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Netgear DG934G router username and password, use our How to Reset a Router Password guide to set your Netgear DG934G router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.
Now that you are logged in to your Netgear DG934G router you should see the following:
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Tenvis JPT3815 requires you to forward the 80 ports. Go ahead and enter the settings shown above into the Add New Port Forwarding Rule menu and then click Apply.Click Security near the top of the screen. You should then see a new menu under Security, in this new menu click Services. You should now be on the following screen.
|Firewall Rules - Inbound Services|
|Send to LAN Server:||...|
And that is it! You are done!
Now that you have forwarded ports for Tenvis JPT3815 on the Netgear DG934G you should test to see if your ports are forwarded correctly.