Port Forwarding the Netgear FR328S Router for Warzone 2100 GameSpy


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Netgear Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Netgear > FR328S > Warzone 2100 GameSpy

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Netgear FR328S router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

192.168.0. <-- Don't Skip This Step!

Login to the Netgear FR328S Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Netgear FR328S Router IP Address

It's ok if you don't know your Netgear FR328S router's internal IP address. You can find it by doing one of the following:

Login To The Netgear FR328S Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Netgear FR328S Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Netgear FR328S router. By default the IP address should be set to 192.168.0.1.

Netgear FR328S Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Netgear FR328S Router Username is: admin

The Default Netgear FR328S Router Password is: password


Click the Ok button to log in to your Netgear FR328S router.


Default Usernames and Passwords for other Netgear Routers

Please visit our Default Netgear Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Netgear FR328S router username and password, use our How to Reset a Router Password guide to set your Netgear FR328S router back to its factory settings.


How to Port Forward Warzone 2100 GameSpy on the Netgear FR328S


Having trouble forwarding ports on the Netgear FR328S?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Netgear FR328S router to save you time and hassle.

Netgear FR328S Router Port Forwarding Screenshots

Now that you are logged in to your Netgear FR328S router you should see the following:



Forward Ports 2300-2400 on the Netgear FR328S

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Warzone 2100 GameSpy requires you to forward the 2300-2400 ports. Go ahead and enter the settings shown above into the NAT Rule Information menu and then click Submit.

Under Security in the left hand menu click Services.
You should see the following menu.
FR328S6.jpg


Click Add a Custom Service
FR328S7.jpg



Service Definition 
Name
Protocol
Port Start
Port End

Go ahead and name your service. It doesn't really matter what the name is, but something easy to remember would be good. Select tcp or udp under type. If you are unsure of the type just select both. Last put in the Start and Finishing port numbers. If the service only requires one port, put that port number in both the start and the finish box. You may need to setup multiple services, depending upon the number of ports/port ranges the software you want to run requires. Click Apply when you have finished. Now we need to go to the second section to continue setting up our port forwarding. Under Security in the left hand menu click Rules.
Once again you should see the following menu.
FR328S8.jpg


Go ahead and click Add in the Outbound or Inbound services section. If you are unsure whether the program you are using will use these ports for inbound or outbound traffic, repeat steps 7 through 9 for both Inbound and Outbound.
FR328S9.jpg



Service
Action
Send to LAN Server...
Wan users
 start:...
 finish:...
Log

Select the service we previously created. Action should be set to ALLOW always. Enter the ip address you want to forward these ports to in Send to LAN Server. If you are forwarding ports so you can run a program on your computer, you should enter the your computers ip address into this box. Wan Users should be set to Any, unless you want to limit who you want to connect to these ports. This would be useful, lets say, if you only wanted your office computer to be able to ftp into your home computer. In that case you would put your office computers ip address in both the start and finish box. Generally log should be set to never, unless of course you want to create a log of network activity.
When you are finished with that configuration go ahead and click Apply.


Forward Ports 2300-2400 on the Netgear FR328S

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Rule Information page. Go ahead and enter those settings and then click Submit.

Under Security in the left hand menu click Services.
You should see the following menu.
FR328S6.jpg


Click Add a Custom Service
FR328S7.jpg



Service Definition 
Name
Protocol
Port Start
Port End

Go ahead and name your service. It doesn't really matter what the name is, but something easy to remember would be good. Select tcp or udp under type. If you are unsure of the type just select both. Last put in the Start and Finishing port numbers. If the service only requires one port, put that port number in both the start and the finish box. You may need to setup multiple services, depending upon the number of ports/port ranges the software you want to run requires. Click Apply when you have finished. Now we need to go to the second section to continue setting up our port forwarding. Under Security in the left hand menu click Rules.
Once again you should see the following menu.
FR328S8.jpg


Go ahead and click Add in the Outbound or Inbound services section. If you are unsure whether the program you are using will use these ports for inbound or outbound traffic, repeat steps 7 through 9 for both Inbound and Outbound.
FR328S9.jpg



Service
Action
Send to LAN Server...
Wan users
 start:...
 finish:...
Log

Select the service we previously created. Action should be set to ALLOW always. Enter the ip address you want to forward these ports to in Send to LAN Server. If you are forwarding ports so you can run a program on your computer, you should enter the your computers ip address into this box. Wan Users should be set to Any, unless you want to limit who you want to connect to these ports. This would be useful, lets say, if you only wanted your office computer to be able to ftp into your home computer. In that case you would put your office computers ip address in both the start and finish box. Generally log should be set to never, unless of course you want to create a log of network activity.
When you are finished with that configuration go ahead and click Apply.

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for Warzone 2100 GameSpy on the Netgear FR328S you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Netgear FR328S Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Netgear Router Screenshots. We have the Internets largest collection of Router Screenshots.