Port Forwarding the Netgear WGT624 Router for QSee QSDR04RTC

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Netgear WGT624 Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Netgear > WGT624 > QSee QSDR04RTC

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Netgear WGT624 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.0. <-- Don't Skip This Step!

Login to the Netgear WGT624 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Netgear WGT624 Router IP Address

It's ok if you don't know your Netgear WGT624 router's internal IP address. You can find it by doing one of the following:

Login To The Netgear WGT624 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Netgear WGT624 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Netgear WGT624 router. By default the IP address should be set to

Netgear WGT624 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Netgear WGT624 Router Username is: admin

The Default Netgear WGT624 Router Password is: password

Click the Ok button to log in to your Netgear WGT624 router.

Default Usernames and Passwords for other Netgear Routers

Please visit our Default Netgear Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Netgear WGT624 router username and password, use our How to Reset a Router Password guide to set your Netgear WGT624 router back to its factory settings.

How to Port Forward QSee QSDR04RTC on the Netgear WGT624

Having trouble forwarding ports on the Netgear WGT624?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select Network
  • Make sure Type is set to DHCP

  • Select Apply
  • Select Exit
The DVR will reboot & pick up an ip address from the router.

Identifying the IP address

  • Press Menu
  • Select Network
  • Write down the ip address, subnet mask & gateway.

Assign a Static IP

  • Change Type to Static
  • Input the same ip address, subnet mask & gateway - (you wrote down earlier).

  • Select Apply
  • Select Exit
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.

Netgear WGT624 Router Port Forwarding Screenshots

Now that you are logged in to your Netgear WGT624 router you should see the following:

Netgear WGT624 Screenshot 2

Click the Port Forwarding link near the left of the page.

Netgear WGT624 Screenshot 3

Click the Add Custom Service button near the bottom of the page.

Netgear WGT624 Screenshot 4

Forward Ports 80 on the Netgear WGT624

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSDR04RTC requires you to forward the 80,9000 ports. Go ahead and enter the settings shown above into the Custom Services menu and then click Add.

Ports - Custom Services

Service Name
Starting Port
Ending Port
Server IP Address . . .

Forward Ports 9000 on the Netgear WGT624

You should see another page of settings that need to be entered into one of the blank lines on your routers Custom Services page. Go ahead and enter those settings and then click Add.

Ports - Custom Services

Service Name
Starting Port
Ending Port
Server IP Address . . .

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for QSee QSDR04RTC on the Netgear WGT624 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Netgear WGT624 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Netgear WGT624 Router Screenshots. We have the Internets largest collection of Router Screenshots.