If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.
You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.
To setup port forwarding on the Netgear WNR2000 router your computer needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Netgear WNR2000 router's internal IP address. You can find it by doing one of the following:
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Netgear WNR2000 router. By default the IP address should be set to 10.0.0.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Netgear WNR2000 router.
Please visit our Default Netgear Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Netgear WNR2000 router username and password, use our How to Reset a Router Password guide to set your Netgear WNR2000 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Netgear WNR2000 router to save you time and hassle.
Now that you are logged in to your Netgear WNR2000 router you should see the following:
Click the Port Forwarding / Port Triggering link near the left of the page.
Click the Add Service button near the bottom of the page.
Enter the name of the program into the Service Name box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded would be a good idea.
Use the Protocol drop down box to select the protocol type of the ports you are forwarding.
If you are forwarding a single port, enter that port number into the Starting Port and the Ending Port boxes. If you are forwarding a range of ports, enter the lowest number of that range into the Starting Port box. Then enter the highest number of that range into the Ending Port box.
Enter the ip address to forward these ports to into the Server IP Address box. If you are forwarding ports so you can run a program on your computer, you should enter your computer's ip address into that box.
When you are finished, click the Apply button.
And that is it! You are done!
Now that you have forwarded ports for any port on the Netgear WNR2000 you should test to see if your ports are forwarded correctly.