To setup port forwarding on the Netopia 3347-02-1006l router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Netopia 3347-02-1006l router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Netopia 3347-02-1006l router. By default the IP address should be set to 192.168.1.254.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Netopia 3347-02-1006l router.
Please visit our Default Netopia Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Netopia 3347-02-1006l router username and password, use our How to Reset a Router Password guide to set your Netopia 3347-02-1006l router back to its factory settings.
Now that you are logged in to your Netopia 3347-02-1006l router you should see the following:
Click the Expert Mode link near the left of the page.
Click the Yes button near the center of the page.
Click the Configure link near the left of the page.
Click the Advanced link near the left of the page.
Click the Pinholes link near the center of the page.
Click the Add button near the center of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Dawn of War Host requires you to forward the 6112 ports. Go ahead and enter the settings shown above into the Pinhole Entry menu and then click Submit.
And that is it! You are done!
Now that you have forwarded ports for Dawn of War Host on the Netopia 3347-02-1006l you should test to see if your ports are forwarded correctly.