To setup port forwarding on the Network Everywhere NWU11B router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Network Everywhere NWU11B router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Network Everywhere NWU11B router. By default the IP address should be set to 192.168.1.1.
Click the Ok button to log in to your Network Everywhere NWU11B router.
Please visit our Default Network Everywhere Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Network Everywhere NWU11B router username and password, use our How to Reset a Router Password guide to set your Network Everywhere NWU11B router back to its factory settings.
Now that you are logged in to your Network Everywhere NWU11B router you should see the following:
Click the Advanced Setup button near the right of the page.
Click the Forwarding button near the top of the page.
Click the View Port Range Forwarding button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Pruna requires you to forward the following ports: 4662,4672. Go ahead and enter the settings shown above into the Port Range Forwarding menu.
You should see another page of settings that need to be entered into one of the blank lines on your routers Port Range Forwarding page. Go ahead and enter those settings now.
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Pruna on the Network Everywhere NWU11B you should test to see if your ports are forwarded correctly.