To setup port forwarding on the Noganet NG-R2504P router your computer needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Noganet NG-R2504P router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Noganet NG-R2504P router. By default the IP address should be set to 192.168.16.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Noganet NG-R2504P router.
Please visit our Default Noganet Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Noganet NG-R2504P router username and password, use our How to Reset a Router Password guide to set your Noganet NG-R2504P router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Noganet NG-R2504P router to save you time and hassle.
Before we can forward ports for Warez, we need to figure out what ports Warez is using. Here is a brief walkthrough on how to do that. Go ahead and open up Warez.
Click Main in the menu at the top of your screen. In the list that drops down click Preferences.
On the left side of this page click on Network. Now we need to what port is in use
for Warez under the option "Listen port". It doesn't really matter what port you choose, but a port between
9000 and 60000 would be a good idea. These higher numbered ports are rarely blocked by ISPs.
Once you have chosen a port (9000 is the default for Warez) please enter that port number into
the box to the right of the Network settings box. That port should also be put into the Listen port box.
I also need to you enter that port number into the box below.
Now that you are logged in to your Noganet NG-R2504P router you should see the following:
Click the Applications link near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Warez requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Virtual Server menu.
|INDEX||PUBLIC PORT||PRIVATE |
|SERVER IP |
When you're finished, click Ok near the right of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Warez on the Noganet NG-R2504P you should test to see if your ports are forwarded correctly.