To setup port forwarding on the Nokia Siemens C2110 router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Nokia Siemens C2110 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Nokia Siemens C2110 router. By default the IP address should be set to 192.168.1.1.
Click the Ok button to log in to your Nokia Siemens C2110 router.
Please visit our Default Nokia Siemens Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Nokia Siemens C2110 router username and password, use our How to Reset a Router Password guide to set your Nokia Siemens C2110 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Nokia Siemens C2110 router to save you time and hassle.
Now that you are logged in to your Nokia Siemens C2110 router you should see the following:
Click the Security link near the left of the page.
You should now see a new menu. In this new menu, click Port Forwarding.
Click the Add button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Europa Universalis III requires you to forward the following ports: 1630-1636. Go ahead and enter the settings shown above into the Add New Port Forwarding Rule menu.
|Forward to Internal Host IP Address:|
|Protocol/Type||External Packet||Forward to Internal Host|
|Port Start||Port End||Port Start||Port End|
And that is it! You are done!
Now that you have forwarded ports for Europa Universalis III on the Nokia Siemens C2110 you should test to see if your ports are forwarded correctly.