To setup port forwarding on the O2 O2-TG585v7 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your O2 O2-TG585v7 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your O2 O2-TG585v7 router. By default the IP address should be set to 192.168.1.254.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
Now that you are logged in to your O2 O2-TG585v7 router you should see the following:
Click the Toolbox button near the left of the page.
You should now see a new menu. In this new menu, click Game & Application Sharing.
Click the Create a new game or application link near the bottom of the page.
Enter the name of the program into the Name box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded would be a good idea.
Put a dot into the Manual Entry of Port Maps radio button.
Click the Next button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Command and Conquer 3 Kanes Wrath requires you to forward the 8088-65535 ports. Go ahead and enter the settings shown above into the Application menu and then click Add.
|Protocol||Port Range||Translate To ...||Trigger Protocol||Trigger Port|
Click the Apply button near the top of the page.
Click the Assign a game or application to a local network device link near the bottom of the page.
Use the Device box to choose a device to forward ports to. This box contains a list of device names that are visible on your network.
Select the application you created using the Game or Application drop down box. Then click Add to enable it.
And that is it! You are done!
Now that you have forwarded ports for Command and Conquer 3 Kanes Wrath on the O2 O2-TG585v7 you should test to see if your ports are forwarded correctly.