Port Forwarding the Origo ASR-8400v2 Router for IL2-Sturmovik

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Origo > ASR-8400v2 > IL2-Sturmovik

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Origo ASR-8400v2 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Origo ASR-8400v2 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Origo ASR-8400v2 Router IP Address

It's ok if you don't know your Origo ASR-8400v2 router's internal IP address. You can find it by doing one of the following:

Login To The Origo ASR-8400v2 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Origo ASR-8400v2 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Origo ASR-8400v2 router. By default the IP address should be set to

Origo ASR-8400v2 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Origo ASR-8400v2 Router Username is: admin

The Default Origo ASR-8400v2 Router Password is: epicrouter

Click the Ok button to log in to your Origo ASR-8400v2 router.

Default Usernames and Passwords for other Origo Routers

Please visit our Default Origo Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Origo ASR-8400v2 router username and password, use our How to Reset a Router Password guide to set your Origo ASR-8400v2 router back to its factory settings.

How to Port Forward IL2-Sturmovik on the Origo ASR-8400v2

Having trouble forwarding ports on the Origo ASR-8400v2?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Origo ASR-8400v2 router to save you time and hassle.

Origo ASR-8400v2 Router Port Forwarding Screenshots

Now that you are logged in to your Origo ASR-8400v2 router you should see the following:

Origo ASR-8400v2 Screenshot 2

Click the Virtual Server link near the left of the page.

Origo ASR-8400v2 Screenshot 3

Forward Ports 21000 on the Origo ASR-8400v2

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. IL2-Sturmovik requires you to forward the 21000 ports. Go ahead and enter the settings shown above into the Virtual Server Configuration menu and then click Add This Setting.

ID Public Port Private Port Port Type Host IP Address  

When you're finished, click Save Settings / Reboot near the left of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for IL2-Sturmovik on the Origo ASR-8400v2 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Origo ASR-8400v2 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.