To setup port forwarding on the Origo AWR-8210 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Origo AWR-8210 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Origo AWR-8210 router. By default the IP address should be set to 10.0.0.2.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
Now that you are logged in to your Origo AWR-8210 router you should see the following:
Click the Virtual Server link near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. TVersity Media Server requires you to forward the 41952 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Add This Setting.
|ID||Public Port -
|Public Port -
|Host IP Address|
When you're finished, click Save Settings / Reboot near the left of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for TVersity Media Server on the Origo AWR-8210 you should test to see if your ports are forwarded correctly.