To setup port forwarding on the Ovislink WL-8064ARM router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Ovislink WL-8064ARM router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Ovislink WL-8064ARM router. By default the IP address should be set to 192.168.1.1.
Click the Log In button to log in to your Ovislink WL-8064ARM router.
Please visit our Default Ovislink Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Ovislink WL-8064ARM router username and password, use our How to Reset a Router Password guide to set your Ovislink WL-8064ARM router back to its factory settings.
Now that you are logged in to your Ovislink WL-8064ARM router you should see the following:
Click the Advanced button near the top of the page.
The menu on the left should change. In this new menu, click Port Forwarding.
Put a dot into the User radio button.
Click the New button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. GeoVision DispatchServer requires you to forward the 21112 ports. Go ahead and enter the settings shown above into the Rule Management menu and then click Apply.
|Port Start:||Port End:|
Select the applications you just created in the Available Rules list, then click the Add > button to move them to the Applied Rules box.
When you are finished, click the Apply button.
When you're finished, click Save All near the left of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for GeoVision DispatchServer on the Ovislink WL-8064ARM you should test to see if your ports are forwarded correctly.