To setup port forwarding on the Ozenda 11gWireless router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Ozenda 11gWireless router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Ozenda 11gWireless router. By default the IP address should be set to 192.168.2.1.
You should see a box prompting you for your Ozenda 11gWireless password. Enter the password now.
Click the Login button to log in to your Ozenda 11gWireless router.
Please visit our Default Ozenda Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Ozenda 11gWireless router password, use our How to Reset a Router Password guide to set your Ozenda 11gWireless router back to its factory settings.
Now that you are logged in to your Ozenda 11gWireless router you should see the following:
Click the NAT link near the left of the page.
You should now see a new menu. In this new menu, click Virtual Server.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. SightSpeed requires you to forward the following ports: 9000. Go ahead and enter the settings shown above into the Virtual Server menu.
|No.||Lan IP Address||Protocol Type||Lan Port||Public Port||Enable|
And that is it! You are done!
Now that you have forwarded ports for SightSpeed on the Ozenda 11gWireless you should test to see if your ports are forwarded correctly.