Port Forwarding DiabloII on the Ozenda AR4505GW

What is Port Forwarding?

View all Router Screenshots.

Home > Routers > Ozenda > AR4505GW > DiabloII

To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for your computer.

Or you can take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

AR4505GW

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to 192.168.2.1.

AR4505GW

You should see a box prompting you for your password. Enter your password now. By default your password is blank. Click the Login button to log in to your router.

Please visit our Default Router Passwords page if the username and password shown above do not work for you.

AR4505GW

Click the NAT button near the left of the page.

You should now see a new menu. In this new menu, click Virtual Server.

AR4505GW



Entry #1

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. DiabloII requires you to forward the 4000,6112-6119 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Add.

No. LAN IP Address Protocol Type LAN
Port
Public
Port
Enable  
1 192.168.2.




Entry #2

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings and then click Add.

No. LAN IP Address Protocol Type LAN
Port
Public
Port
Enable  
2 192.168.2.

When you're finished, click Save Settings near the bottom of the screen to save your changes.

And that's it! You're done!


To test if your port has been properly forwarded, you can use our Port Checker tool.

Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.