To setup port forwarding on the Ozenda AR4505GW router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Ozenda AR4505GW router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Ozenda AR4505GW router. By default the IP address should be set to 192.168.2.1.
You should see a box prompting you for your Ozenda AR4505GW password. Enter the password now.
Click the Login button to log in to your Ozenda AR4505GW router.
Please visit our Default Ozenda Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Ozenda AR4505GW router password, use our How to Reset a Router Password guide to set your Ozenda AR4505GW router back to its factory settings.
Before we can forward ports for HFS, we need to set the ports HFS is using. Go ahead and open up HFS.
At the very top of your screen you should see a Port box. That box contains the port that you need to forward for HFS. You can change this port if you want to. Please enter the port you chose into the box below.
Now that you are logged in to your Ozenda AR4505GW router you should see the following:
Click the NAT button near the left of the page.
You should now see a new menu. In this new menu, click Virtual Server.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Http File Server-HFS requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Virtual Server menu and then click Add.
|No.||LAN IP Address||Protocol Type||LAN
When you're finished, click Save Settings near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Http File Server-HFS on the Ozenda AR4505GW you should test to see if your ports are forwarded correctly.