To setup port forwarding on the Philips CGA5720S-TE router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Philips CGA5720S-TE router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Philips CGA5720S-TE router. By default the IP address should be set to 192.168.2.1.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Philips CGA5720S-TE router to save you time and hassle.
Configuring the DVR to pick up an IP address
Power Cycle the DVR
Identifying the IP address
Assign a Static IP
Now that you are logged in to your Philips CGA5720S-TE router you should see the following:
Click the Advanced Settings link near the left of the page.
Click the NAT link near the left of the page.
Click the Virtual Server link near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Qsee QSTD2416C16-320 requires you to forward the 80,2000 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Add.
|No.||Lan IP Address||Protocol Type||Lan|
And that is it! You are done!
Now that you have forwarded ports for Qsee QSTD2416C16-320 on the Philips CGA5720S-TE you should test to see if your ports are forwarded correctly.