To setup port forwarding on the Philips CPWBS154-18 router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Philips CPWBS154-18 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Philips CPWBS154-18 router. By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Philips CPWBS154-18 router.
Please visit our Default Philips Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Philips CPWBS154-18 router username and password, use our How to Reset a Router Password guide to set your Philips CPWBS154-18 router back to its factory settings.
Before we can forward ports for Utorrent, we need to figure out what ports Utorrent is using. Here is a brief walkthrough on how to do that. Go ahead and open up Utorrent.
Click Options in the menu at the top of your screen. In the list that drops down click Preferences.
Click Connections on the left hand side of the Utorrent program. You should now see the menu shown in the screenshot above. Make sure the Enable UPnP box is unchecked. The number in the Port Used for Incoming Connections box contains the port you need to forward. You can change the port number, if you want to. Please enter the port you chose into the box below.
Now that you are logged in to your Philips CPWBS154-18 router you should see the following:
Click the Advanced Settings link near the left of the page.
You should now see a new menu. In this new menu, click NAT.
Click the Virtual Server link near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Utorrent requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Virtual Server menu.
|No.||Lan IP Address||Protocol Type||Lan
And that is it! You are done!
Now that you have forwarded ports for Utorrent on the Philips CPWBS154-18 you should test to see if your ports are forwarded correctly.