To setup port forwarding on the Philips SNA6500 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Philips SNA6500 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Philips SNA6500 router. By default the IP address should be set to 192.168.2.1.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
Now that you are logged in to your Philips SNA6500 router you should see the following:
Click the Advanced Settings link near the left of the page.
Click the NAT link near the left of the page.
Click the Virtual Server link near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Napster requires you to forward the 6699 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Add.
|No.||Lan IP Address||Protocol Type||Lan
And that is it! You are done!
Now that you have forwarded ports for Napster on the Philips SNA6500 you should test to see if your ports are forwarded correctly.