To setup port forwarding on the Pirelli DRG-A124G router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Pirelli DRG-A124G router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Pirelli DRG-A124G router. By default the IP address should be set to 192.168.1.1.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
Now that you are logged in to your Pirelli DRG-A124G router you should see the following:
Click the NAT button near the left of the page.
You should now see a new menu. In this new menu, click Virtual Server.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. PS3 Just Cause 2 requires you to forward the 5223,3478,3479,3658 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Add.
|No.||LAN IP Address||Protocol Type||LAN
And that is it! You are done!
Now that you have forwarded ports for PS3 Just Cause 2 on the Pirelli DRG-A124G you should test to see if your ports are forwarded correctly.