To setup port forwarding on the Planet ADE-4200 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Planet ADE-4200 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Planet ADE-4200 router. By default the IP address should be set to 192.168.1.254.
Click the Ok button to log in to your Planet ADE-4200 router.
Please visit our Default Planet Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Planet ADE-4200 router username and password, use our How to Reset a Router Password guide to set your Planet ADE-4200 router back to its factory settings.
Now that you are logged in to your Planet ADE-4200 router you should see the following:
Click the Configuration link near the left of the page.
You should now see a new menu. In this new menu, click Virtual Server.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Supercircuits DMR91U requires you to forward the following ports: 80,9000. Go ahead and enter the settings shown above into the Virtual Server menu.
You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings now.
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Supercircuits DMR91U on the Planet ADE-4200 you should test to see if your ports are forwarded correctly.