To setup port forwarding on the Planet ADE-4400 router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Planet ADE-4400 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Planet ADE-4400 router. By default the IP address should be set to 192.168.1.254.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Planet ADE-4400 router.
Please visit our Default Planet Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Planet ADE-4400 router username and password, use our How to Reset a Router Password guide to set your Planet ADE-4400 router back to its factory settings.
Now that you are logged in to your Planet ADE-4400 router you should see the following:
Click the Advanced link near the left of the page.
Click the NAT link.
Click the Edit Virtual Server link.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Dawn of War Host requires you to forward the following ports: 6112. Go ahead and enter the settings shown above into the Edit Virtual Server menu.
|Start Port No.||End Port No.||IP Address|
When you're finished, click Save near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Dawn of War Host on the Planet ADE-4400 you should test to see if your ports are forwarded correctly.