To setup port forwarding on the Planet ADW-4401 router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Planet ADW-4401 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Planet ADW-4401 router. By default the IP address should be set to 192.168.0.1.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Planet ADW-4401 router to save you time and hassle.
Now that you are logged in to your Planet ADW-4401 router you should see the following:
Click the Advanced Setup link near the top of the page.
Click the NAT link near the top of the page.
Click the Virtual Server link near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Http File Server-HFS requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Virtual Server menu and then click Save.
|Rule Index :|
|Start Port Number :|
|End Port Number :|
|Local IP Address :|
And that is it! You are done!
Now that you have forwarded ports for Http File Server-HFS on the Planet ADW-4401 you should test to see if your ports are forwarded correctly.