To setup port forwarding on the Planet XRT-401D router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Planet XRT-401D router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Planet XRT-401D router. By default the IP address should be set to 192.168.0.1.
Click the Ok button to log in to your Planet XRT-401D router.
Please visit our Default Planet Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Planet XRT-401D router username and password, use our How to Reset a Router Password guide to set your Planet XRT-401D router back to its factory settings.
Now that you are logged in to your Planet XRT-401D router you should see the following:
Click the General Setup button near the left of the page.
Click the NAT link near the left of the page.
This router has two different sections that allow you to forward ports. One section allows you to forward a range of ports, and the other allows you to forward a single port. To forward a range of ports, click Port Forwarding. To forward a single port, click Virtual Server.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Hexic 2 requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the Port Forwarding or Virtual Server menu and then click Add.
|Enable Virtual Server|
|Private IP||Private Port||Type||Public Port||Comment|
And that is it! You are done!
Now that you have forwarded ports for XBOX360 Hexic 2 on the Planet XRT-401D you should test to see if your ports are forwarded correctly.