To setup port forwarding on the Planet XRT-401E router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Planet XRT-401E router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Planet XRT-401E router. By default the IP address should be set to 192.168.0.136.
Click the Ok button to log in to your Planet XRT-401E router.
Please visit our Default Planet Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Planet XRT-401E router username and password, use our How to Reset a Router Password guide to set your Planet XRT-401E router back to its factory settings.
Now that you are logged in to your Planet XRT-401E router you should see the following:
Click the NAT link near the top of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Yahoo Super Webcam requires you to forward the following ports: 5100. Go ahead and enter the settings shown above into the Virtual Server menu.
|Private IP||Private Port||Type||Public Port||Comment||Enabled|
When you're finished, click Ok near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Yahoo Super Webcam on the Planet XRT-401E you should test to see if your ports are forwarded correctly.