Port Forwarding the Planex BLW-54SAG Router for XBOX360 Ride to Hell

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Planex > BLW-54SAG > XBOX360 Ride to Hell

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Planex BLW-54SAG router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.1. <-- Don't Skip This Step!

Login to the Planex BLW-54SAG Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Planex BLW-54SAG Router IP Address

It's ok if you don't know your Planex BLW-54SAG router's internal IP address. You can find it by doing one of the following:

Login To The Planex BLW-54SAG Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Planex BLW-54SAG Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Planex BLW-54SAG router. By default the IP address should be set to

Planex BLW-54SAG Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Planex BLW-54SAG Router Username is: admin

The Default Planex BLW-54SAG Router Password is: password

Click the Ok button to log in to your Planex BLW-54SAG router.

Default Usernames and Passwords for other Planex Routers

Please visit our Default Planex Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Planex BLW-54SAG router username and password, use our How to Reset a Router Password guide to set your Planex BLW-54SAG router back to its factory settings.

How to Port Forward XBOX360 Ride to Hell on the Planex BLW-54SAG

Having trouble forwarding ports on the Planex BLW-54SAG?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Planex BLW-54SAG Router Port Forwarding Screenshots

Now that you are logged in to your Planex BLW-54SAG router you should see the following:

Planex BLW-54SAG Screenshot 2

Click the Applications & Gaming button near the top of the page.

Planex BLW-54SAG Screenshot 3

Forward Ports 3074 on the Planex BLW-54SAG

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Ride to Hell requires you to forward the following ports: 3074. Go ahead and enter the settings shown above into the Port Range Forwarding menu.

Start ~ End Port Protocol To IP Address Enabled
~ TCP UDP 192.168.1.

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for XBOX360 Ride to Hell on the Planex BLW-54SAG you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Planex BLW-54SAG Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.