Port Forwarding the Prolink H9300G Router for QSee QSDR4420RC-320


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Prolink Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Prolink > H9300G > QSee QSDR4420RC-320

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Prolink H9300G router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the Prolink H9300G Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Prolink H9300G Router IP Address

It's ok if you don't know your Prolink H9300G router's internal IP address. You can find it by doing one of the following:

Login To The Prolink H9300G Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Prolink H9300G Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Prolink H9300G router. By default the IP address should be set to 192.168.1.254.

Prolink H9300G Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Prolink H9300G Router Username is: admin

The Default Prolink H9300G Router Password is: admin


Click the Ok button to log in to your Prolink H9300G router.


Default Usernames and Passwords for other Prolink Routers

Please visit our Default Prolink Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Prolink H9300G router username and password, use our How to Reset a Router Password guide to set your Prolink H9300G router back to its factory settings.


How to Port Forward QSee QSDR4420RC-320 on the Prolink H9300G


Having trouble forwarding ports on the Prolink H9300G?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Prolink H9300G router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select Network
  • Make sure Type is set to DHCP

  • Select Apply
  • Select Exit
The DVR will reboot & pick up an ip address from the router.


Identifying the IP address

  • Press Menu
  • Select Network
  • Write down the ip address, subnet mask & gateway.


Assign a Static IP

  • Change Type to Static
  • Input the same ip address, subnet mask & gateway - (you wrote down earlier).

  • Select Apply
  • Select Exit
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.

Prolink H9300G Router Port Forwarding Screenshots

Now that you are logged in to your Prolink H9300G router you should see the following:

Prolink H9300G Screenshot 2

Click the Virtual Server link near the left of the page.

Prolink H9300G Screenshot 3

Click the Add Virtual Server link near the center of the page.

Prolink H9300G Screenshot 4

Forward Ports 80 on the Prolink H9300G

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSDR4420RC-320 requires you to forward the 80,9000 ports. Go ahead and enter the settings shown above into the Add Virtual Server menu and then click Apply.

Virtual Server Entry
Time Schedule
Application Helper
Protocol
External Portfrom to
Redirect Portfrom to
Internal IP Address Candidates


Forward Ports 9000 on the Prolink H9300G

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Virtual Server page. Go ahead and enter those settings and then click Apply.

Virtual Server Entry
Time Schedule
Application Helper
Protocol
External Portfrom to
Redirect Portfrom to
Internal IP Address Candidates

When you're finished, click Save Config near the bottom of the screen to save your changes.

And that's it! You're done!


Test if Your Ports are Open

Now that you have forwarded ports for QSee QSDR4420RC-320 on the Prolink H9300G you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Prolink H9300G Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Prolink Router Screenshots. We have the Internets largest collection of Router Screenshots.