Port Forwarding the Prolink Hurricane-9000G Router for LDC++

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Prolink Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Prolink Hurricane-9000G router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Prolink Hurricane-9000G Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Prolink Hurricane-9000G Router IP Address

It's ok if you don't know your Prolink Hurricane-9000G router's internal IP address. You can find it by doing one of the following:

Login To The Prolink Hurricane-9000G Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Prolink Hurricane-9000G Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Prolink Hurricane-9000G router. By default the IP address should be set to

Prolink Hurricane-9000G Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Prolink Hurricane-9000G Router Username is: admin

The Default Prolink Hurricane-9000G Router Password is: admin

Click the Ok button to log in to your Prolink Hurricane-9000G router.

Default Usernames and Passwords for other Prolink Routers

Please visit our Default Prolink Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Prolink Hurricane-9000G router username and password, use our How to Reset a Router Password guide to set your Prolink Hurricane-9000G router back to its factory settings.

How to Port Forward LDC++ on the Prolink Hurricane-9000G

Having trouble forwarding ports on the Prolink Hurricane-9000G?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Prolink Hurricane-9000G router to save you time and hassle.

Before we can forward ports for LDC++, we need to figure out what ports LDC++ is using. Here is a brief walkthrough on how to do that. Go ahead and open up LDC++.

In the menu at the top of your screen click the File option. In the list the drops down click the Settings link.

There should be a list of options on the left hand side of the window that poped up. Click the Connection Settings option in this list. Put a dot into the Firewall with Manual Port Forwarding radio button. You should see a TCP box and an UDP box. Enter a random port into each of these boxes. It doesn't matter what ports you choose, but a port numbers between 10000 and 60000 would be a good idea. A higher numbered port is generally the best to use, because most ISP's do not block the higher numbered ports. Please enter the port you chose for the TCP box into the box below.

LDC++'s port for incoming TCP connections

Please enter the port you chose for the UDP box into the box below.

LDC++'s port for incoming UDP connections

Prolink Hurricane-9000G Router Port Forwarding Screenshots

Now that you are logged in to your Prolink Hurricane-9000G router you should see the following:

Prolink Hurricane-9000G Screenshot 2

Click the Advanced Setup link near the top of the page.

Prolink Hurricane-9000G Screenshot 3

Click the NAT link near the top of the page.

Prolink Hurricane-9000G Screenshot 4

Click the Virtual Server link near the bottom of the page.

Prolink Hurricane-9000G Screenshot 5

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. LDC++ requires you to forward the AppFullPortsListTag ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Save.

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings and then click Save.

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for LDC++ on the Prolink Hurricane-9000G you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Prolink Hurricane-9000G Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Prolink Router Screenshots. We have the Internets largest collection of Router Screenshots.