To setup port forwarding on the Prolink Hurricane-9000P router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Prolink Hurricane-9000P router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Prolink Hurricane-9000P router. By default the IP address should be set to 10.0.0.2.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Prolink Hurricane-9000P router.
Please visit our Default Prolink Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Prolink Hurricane-9000P router username and password, use our How to Reset a Router Password guide to set your Prolink Hurricane-9000P router back to its factory settings.
Now that you are logged in to your Prolink Hurricane-9000P router you should see the following:
Click the Port Forwarding link near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Lorex LH320 requires you to forward the 80 ports. Go ahead and enter the settings shown above into the Port Forwarding Configuration menu and then click Add This Setting.
|ID||Public Port||Private Port||Port Type||Host IP Address|
When you're finished, click Click here to Reboot near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Lorex LH320 on the Prolink Hurricane-9000P you should test to see if your ports are forwarded correctly.