If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.
You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.
To setup port forwarding on the Pronet PN-54WRT router your computer needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Pronet PN-54WRT router's internal IP address. You can find it by doing one of the following:
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Pronet PN-54WRT router. By default the IP address should be set to 192.168.10.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Pronet PN-54WRT router.
Please visit our Default Pronet Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Pronet PN-54WRT router username and password, use our How to Reset a Router Password guide to set your Pronet PN-54WRT router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Pronet PN-54WRT router to save you time and hassle.
Now that you are logged in to your Pronet PN-54WRT router you should see the following:
Click the Forwarding link near the left of the page.
You should now see a new menu. In this new menu, click Virtual Servers.
Click the Add New button near the center of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Rocketmen It Came from Uranus requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the Add or Modify a Virtual Server Entry menu and then click Save.
| Service Port: | |
| IP Address: | |
| Protocol: | |
| Status: |
And that is it! You are done!
Now that you have forwarded ports for XBOX360 Rocketmen It Came from Uranus on the Pronet PN-54WRT you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
Didn't find the screenshot you were looking for? Check our our Pronet Router Screenshots. We have the Internets largest collection of Router Screenshots.