Login To The Q-Tec 790RH Router Using Your Web Browser
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Q-Tec 790RH router.
By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now.
The Default Q-Tec 790RH Router Username is: blank
The Default Q-Tec 790RH Router Password is: blank
Click the Ok button to log in to your Q-Tec 790RH router.
Default Usernames and Passwords for other Q-Tec Routers
If you can't login to your router because you forgot your Q-Tec 790RH router username and password, use our
How to Reset a Router Password guide to set your
Q-Tec 790RH router back to its factory settings.
How to Port Forward Enemy Engaged 2 on the Q-Tec 790RH
Having trouble forwarding ports on the Q-Tec 790RH?
If you are having trouble with this guide, then perhaps PFConfig may be your solution.
PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.
Q-Tec 790RH Router Port Forwarding Screenshots
Now that you are logged in to your Q-Tec 790RH router you should see the following:
Click the Advanced Setup link near the center of the page.
Click the NAT link near the left of the page.
Click the Virtual Server link near the left of the page.
Forward Ports 2300-2400,47624 on the Q-Tec 790RH
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Enemy Engaged 2 requires
you to forward the following ports: 2300-2400,47624. Go ahead and enter the settings shown above into the Virtual Server menu.
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Test if Your Ports are Open
Now that you have forwarded ports for Enemy Engaged 2 on the Q-Tec 790RH you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Open Port Check tool.
Our Open Port Check tool is the only online port checking tool with Guaranteed Results.