To setup port forwarding on the Qwest GT701-WG router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Qwest GT701-WG router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Qwest GT701-WG router. By default the IP address should be set to 192.168.0.1.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
Now that you are logged in to your Qwest GT701-WG router you should see the following:
Click the Advanced Setup button near the top of the page.
Click the Applications link near the left of the page.
Put a dot into the User radio button.
Click the New button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Lord of the Rings Battle Of Middle Earth II requires you to forward the 8088-65535 ports. Go ahead and enter the settings shown above into the Rule Management menu and then click Apply.
|Port Start||Port End|
Use the Lan Device box to choose a device to forward ports to. This box contains a list of device names that are visible on your network.
Select the applications you just created in the Available Rules list, then click the Add >> button to move them to the Applied Rules box.
When you are finished, click the Apply button.
Now that you have forwarded ports for Lord of the Rings Battle Of Middle Earth II on the Qwest GT701-WG you should test to see if your ports are forwarded correctly.