Port Forwarding the Repotec RP-IP2105 Router for Limewire

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Repotec RP-IP2105 Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Repotec > RP-IP2105 > Limewire

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Repotec RP-IP2105 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.10. <-- Don't Skip This Step!

Login to the Repotec RP-IP2105 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Repotec RP-IP2105 Router IP Address

It's ok if you don't know your Repotec RP-IP2105 router's internal IP address. You can find it by doing one of the following:

Login To The Repotec RP-IP2105 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Repotec RP-IP2105 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Repotec RP-IP2105 router. By default the IP address should be set to

Repotec RP-IP2105 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Repotec RP-IP2105 Router Username is: guest

The Default Repotec RP-IP2105 Router Password is: guest

Click the Ok button to log in to your Repotec RP-IP2105 router.

Default Usernames and Passwords for other Repotec Routers

Please visit our Default Repotec Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Repotec RP-IP2105 router username and password, use our How to Reset a Router Password guide to set your Repotec RP-IP2105 router back to its factory settings.

How to Port Forward Limewire on the Repotec RP-IP2105

Having trouble forwarding ports on the Repotec RP-IP2105?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Before we can forward ports for LimeWire, we need to figure out what ports LimeWire is using. Here is a brief walkthrough on how to do that. Go ahead and open up LimeWire.

Click Tools in the menu at the top of your screen. In the list that drops down click Options.

On the left side of this page click the plus sign in front of Advanced. Another list should have appeared under advanced. Click the Firewall Config option in this new list. In the Router Configurations section we want to put a dot into the Manual Port Forward radio button. Now we need to select a port to use for LimeWire. It doesn't really matter what port you choose, but a port between 10000 and 60000 would be a good idea. These higher numbered ports are rarely blocked by ISPs. Once you have chosen a port please enter that port number into the box to the right of the Manual Port Forward box. That port should also be put into the Listen on Port box. I also need to you enter that port number into the box below.

LimeWire's Port for incoming connections

Repotec RP-IP2105 Router Port Forwarding Screenshots

Now that you are logged in to your Repotec RP-IP2105 router you should see the following:

Repotec RP-IP2105 Screenshot 2

Click the NAT button near the left of the page.

Repotec RP-IP2105 Screenshot 3

Forward User Defined Port on the Repotec RP-IP2105

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Limewire requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Virtual Server menu and then click Add.

Rule Name
Internal Server IP Address 192.168.10.
External Port
Internal Port

Forward User Defined Port on the Repotec RP-IP2105

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings and then click Add.

Rule Name
Internal Server IP Address 192.168.10.
External Port
Internal Port

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for Limewire on the Repotec RP-IP2105 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Repotec RP-IP2105 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Repotec RP-IP2105 Router Screenshots. We have the Internets largest collection of Router Screenshots.