To setup port forwarding on the SBS BW5150 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your SBS BW5150 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your SBS BW5150 router. By default the IP address should be set to 192.168.1.1.
Now that you are logged in to your SBS BW5150 router you should see the following:
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your SBS BW5150 router.
Please visit our Default SBS Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your SBS BW5150 router username and password, use our How to Reset a Router Password guide to set your SBS BW5150 router back to its factory settings.
Click the Services link near the left of the page.
You should now see a new menu. In this new menu, click Firewall.
You should now see a new menu. In this new menu, click Port Forwarding.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Lego Star Wars The Complete Saga requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Add.
|Port Forwarding: Disable Enable|
|Protocol: Comment: Enable|
|Local IP Address: Local Port: -|
|Remote IP Address: Public Port: -|
And that is it! You are done!
Now that you have forwarded ports for XBOX360 Lego Star Wars The Complete Saga on the SBS BW5150 you should test to see if your ports are forwarded correctly.