To setup port forwarding on the SMC 2804WBRP-G router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your SMC 2804WBRP-G router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your SMC 2804WBRP-G router. By default the IP address should be set to 192.168.2.1.
You should see a box prompting you for your SMC 2804WBRP-G password. Enter the password now.
Click the Login button to log in to your SMC 2804WBRP-G router.
Please visit our Default SMC Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your SMC 2804WBRP-G router password, use our How to Reset a Router Password guide to set your SMC 2804WBRP-G router back to its factory settings.
After forwarding ports for BomberMan Online be sure to select the UDP - On option like shown in the menu below.
Now that you are logged in to your SMC 2804WBRP-G router you should see the following:
Click the NAT link near the left of the page.
You should now see a new menu. In this new menu, click Virtual Server.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Bomberman Online requires you to forward the 8864-8870 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Add.
|No.||Lan IP Address||Protocol Type||Lan
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Bomberman Online on the SMC 2804WBRP-G you should test to see if your ports are forwarded correctly.