To setup port forwarding on the SMC 2804WBRV2 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your SMC 2804WBRV2 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your SMC 2804WBRV2 router. By default the IP address should be set to 192.168.1.2.
You should see a box prompting you for your SMC 2804WBRV2 password. Enter the password now.
Click the Login button to log in to your SMC 2804WBRV2 router.
Please visit our Default SMC Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your SMC 2804WBRV2 router password, use our How to Reset a Router Password guide to set your SMC 2804WBRV2 router back to its factory settings.
Now that you are logged in to your SMC 2804WBRV2 router you should see the following:
Click the NAT link near the left of the page.
You should now see a new menu. In this new menu, click Virtual Server.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Fantasy Grounds requires you to forward the following ports: 1802. Go ahead and enter the settings shown above into the Virtual Server menu.
|Private IP||Service Port||Type||Enabled|
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Fantasy Grounds on the SMC 2804WBRV2 you should test to see if your ports are forwarded correctly.