To setup port forwarding on the SMC SMC8014 router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your SMC SMC8014 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your SMC SMC8014 router. By default the IP address should be set to 10.1.10.1.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your SMC SMC8014 router to save you time and hassle.
This guide will work for the following CanVision products.
IP-100 (Video and audio)
IP-300 (video only ip network camera)
IP-301 (Video and audio)
IP-200 (video and audio server box)
PT-300 (Pan Tilt video and audio gpio, WiFi, POE, ip network camera)
IP-560 (video and audio plus gpio plus changable lens)
IP-220 (video and audio , gpio, RS485 control video server box)
IP-580 (video and audio , gpio plus changable lens)
PT-380 (Pan Tilt video and audio , gpio, WiFi, POE, plus changable lens)
TVS-120 (IP television brocasting system)
The default port used by these cameras is TCP Port 80. You can change this port if you want to. To do so open up the O'RITE utility.
The HTTP Port1 box contains the port that should needs to be forwarded. Enter the port you chose in the following box. If you did not change port that your camera is using, just enter 80 into the following box.
Now that you are logged in to your SMC SMC8014 router you should see the following:
Click the Firewall link near the left of the page.
Click the Port Configuration link near the top of the page.
Click the add new button near the center of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. CanVision requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Port Forwarding menu and then click apply.
|Port Range||Protocol||IP Address|
When you're finished, click apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for CanVision on the SMC SMC8014 you should test to see if your ports are forwarded correctly.