To setup port forwarding on the SMC SMC8014WN router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your SMC SMC8014WN router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your SMC SMC8014WN router. By default the IP address should be set to 192.168.0.1.
Click the Login button to log in to your SMC SMC8014WN router.
Please visit our Default SMC Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your SMC SMC8014WN router username and password, use our How to Reset a Router Password guide to set your SMC SMC8014WN router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your SMC SMC8014WN router to save you time and hassle.
Now that you are logged in to your SMC SMC8014WN router you should see the following:
Click the NAT link near the left of the page.
You should now see a new menu. In this new menu, click Port Forwarding.
Click the Add button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Tams11 Gaming Lobby requires you to forward the 7772 ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Apply.
|LAN Server IP||...|
|Public IP Ports|
|Start Public Port|
|End Public Port|
And that is it! You are done!
Now that you have forwarded ports for Tams11 Gaming Lobby on the SMC SMC8014WN you should test to see if your ports are forwarded correctly.