To setup port forwarding on the SMC SMCBR14UP router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your SMC SMCBR14UP router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your SMC SMCBR14UP router. By default the IP address should be set to 192.168.2.1.
You should see a box prompting you for your SMC SMCBR14UP password. Enter the password now.
Click the Ok button to log in to your SMC SMCBR14UP router.
Please visit our Default SMC Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your SMC SMCBR14UP router password, use our How to Reset a Router Password guide to set your SMC SMCBR14UP router back to its factory settings.
Now that you are logged in to your SMC SMCBR14UP router you should see the following:
Click the NAT link near the left of the page.
You should now see a new menu. In this new menu, click Virtual Server.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 X-Blades requires you to forward the following ports: 3074. Go ahead and enter the settings shown above into the Virtual Server menu.
|Private IP||Private Port||Public Port||Type||Enabled|
When you're finished, click Enter near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for XBOX360 X-Blades on the SMC SMCBR14UP you should test to see if your ports are forwarded correctly.