Port Forwarding the SMC SMCWBR14S-N3 Router for QSee QT426

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View SMC SMCWBR14S-N3 Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > SMC > SMCWBR14S-N3 > QSee QT426

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the SMC SMCWBR14S-N3 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the SMC SMCWBR14S-N3 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your SMC SMCWBR14S-N3 Router IP Address

It's ok if you don't know your SMC SMCWBR14S-N3 router's internal IP address. You can find it by doing one of the following:

Login To The SMC SMCWBR14S-N3 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

SMC SMCWBR14S-N3 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your SMC SMCWBR14S-N3 router. By default the IP address should be set to

SMC SMCWBR14S-N3 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default SMC SMCWBR14S-N3 Router Username is: admin

The Default SMC SMCWBR14S-N3 Router Password is: smcadmin

Click the Apply button to log in to your SMC SMCWBR14S-N3 router.

Default Usernames and Passwords for other SMC Routers

Please visit our Default SMC Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your SMC SMCWBR14S-N3 router username and password, use our How to Reset a Router Password guide to set your SMC SMCWBR14S-N3 router back to its factory settings.

How to Port Forward QSee QT426 on the SMC SMCWBR14S-N3

Having trouble forwarding ports on the SMC SMCWBR14S-N3?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

  • Go to the Network Menu.
  • Put a check into the Obtain an IP Address Automatically box.
  • Click the Test button.
  • Look near the lower left corner. If it says Ok, then click on Apply, then Exit.

  • Go to Menu - Information and Network
  • Write down the IP Address, Subnet Mask and Gateway.

  • Go back to the Network Menu.
  • Uncheck the Obtain an IP Address Automatically box.
  • Now enter the IP Address, Gateway and Subnet Mask you wrote down earlier.
  • When you're done click Apply, then Exit.

SMC SMCWBR14S-N3 Router Port Forwarding Screenshots

Now that you are logged in to your SMC SMCWBR14S-N3 router you should see the following:

SMC SMCWBR14S-N3 Screenshot 2

Click the Firewall button near the left of the page.

You should now see a new menu. In this new menu, click Virtual Server.

SMC SMCWBR14S-N3 Screenshot 3

Forward Ports 80 on the SMC SMCWBR14S-N3

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QT426 requires you to forward the 80,6036 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Apply.

Virtual Server Settings
IP Address
Port Range -

Forward Ports 6036 on the SMC SMCWBR14S-N3

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings and then click Apply.

Virtual Server Settings
IP Address
Port Range -

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for QSee QT426 on the SMC SMCWBR14S-N3 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

SMC SMCWBR14S-N3 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our SMC SMCWBR14S-N3 Router Screenshots. We have the Internets largest collection of Router Screenshots.