Login To The SMC WBR14-N Router Using Your Web Browser
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your SMC WBR14-N router.
By default the IP address should be set to 192.168.2.1.
You should see a box prompting you for your username and password. Enter your username and password now.
The Default SMC WBR14-N Router Username is: Admin
The Default SMC WBR14-N Router Password is: smcadmin
Click the Log In button to log in to your SMC WBR14-N router.
Default Usernames and Passwords for other SMC Routers
If you can't login to your router because you forgot your SMC WBR14-N router username and password, use our
How to Reset a Router Password guide to set your
SMC WBR14-N router back to its factory settings.
How to Port Forward QSee QT426 on the SMC WBR14-N
Having trouble forwarding ports on the SMC WBR14-N?
If you are having trouble with this guide, then perhaps PFConfig may be your solution.
PFConfig is a software tool that will automatically forward ports for your SMC WBR14-N router to save you time and hassle.
Go to the Network Menu.
Put a check into the Obtain an IP Address Automatically box.
Click the Test button.
Look near the lower left corner. If it says Ok, then click on Apply, then Exit.
Go to Menu - Information and Network
Write down the IP Address, Subnet Mask and Gateway.
Go back to the Network Menu.
Uncheck the Obtain an IP Address Automatically box.
Now enter the IP Address, Gateway and Subnet Mask you wrote down earlier.
When you're done click Apply, then Exit.
SMC WBR14-N Router Port Forwarding Screenshots
Now that you are logged in to your SMC WBR14-N router you should see the following:
Click the Advanced link near the top of the page.
The menu on the left should change. In this new menu, click Gaming.
Forward Ports 80,6036 on the SMC WBR14-N
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QT426 requires
you to forward the 80,6036 ports. Go ahead and enter the settings shown above into the Gaming menu and then click Save.
IP Address :
TCP Ports to Open :
UDP Ports to Open :
When you're finished, click Save Settings near the top of the screen to save your changes.
And that's it! You're done!
Test if Your Ports are Open
Now that you have forwarded ports for QSee QT426 on the SMC WBR14-N you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Open Port Check tool.
Our Open Port Check tool is the only online port checking tool with Guaranteed Results.