Port Forwarding the SMC WBR14S-N2 Router for Sonic Robo Blast 2

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View SMC Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > SMC > WBR14S-N2 > Sonic Robo Blast 2

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the SMC WBR14S-N2 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.0. <-- Don't Skip This Step!

Login to the SMC WBR14S-N2 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your SMC WBR14S-N2 Router IP Address

It's ok if you don't know your SMC WBR14S-N2 router's internal IP address. You can find it by doing one of the following:

Login To The SMC WBR14S-N2 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

SMC WBR14S-N2 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your SMC WBR14S-N2 router. By default the IP address should be set to

SMC WBR14S-N2 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default SMC WBR14S-N2 Router Username is: blank

The Default SMC WBR14S-N2 Router Password is: smcadmin

Click the Ok button to log in to your SMC WBR14S-N2 router.

Default Usernames and Passwords for other SMC Routers

Please visit our Default SMC Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your SMC WBR14S-N2 router username and password, use our How to Reset a Router Password guide to set your SMC WBR14S-N2 router back to its factory settings.

How to Port Forward Sonic Robo Blast 2 on the SMC WBR14S-N2

Having trouble forwarding ports on the SMC WBR14S-N2?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

SMC WBR14S-N2 Router Port Forwarding Screenshots

Now that you are logged in to your SMC WBR14S-N2 router you should see the following:

SMC WBR14S-N2 Screenshot 2

Click the NAT button near the left of the page.

You should now see a new menu. In this new menu, click Virtual Server.

SMC WBR14S-N2 Screenshot 3

Forward Ports 5029 on the SMC WBR14S-N2

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Sonic Robo Blast 2 requires you to forward the 5029 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Add.

No. LAN Address Protocol
LAN Port Public Port Enable  
1 ...

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for Sonic Robo Blast 2 on the SMC WBR14S-N2 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

SMC WBR14S-N2 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our SMC Router Screenshots. We have the Internets largest collection of Router Screenshots.