Port Forwarding the Sabrent NT-WRLRT Router for Neverwinter Nights 2

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Sabrent > NT-WRLRT > Neverwinter Nights 2

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Sabrent NT-WRLRT router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.0. <-- Don't Skip This Step!

Login to the Sabrent NT-WRLRT Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Sabrent NT-WRLRT Router IP Address

It's ok if you don't know your Sabrent NT-WRLRT router's internal IP address. You can find it by doing one of the following:

Login To The Sabrent NT-WRLRT Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Sabrent NT-WRLRT Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Sabrent NT-WRLRT router. By default the IP address should be set to

Sabrent NT-WRLRT Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Sabrent NT-WRLRT Router Username is: admin

The Default Sabrent NT-WRLRT Router Password is: admin

Click the Ok button to log in to your Sabrent NT-WRLRT router.

Default Usernames and Passwords for other Sabrent Routers

Please visit our Default Sabrent Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Sabrent NT-WRLRT router username and password, use our How to Reset a Router Password guide to set your Sabrent NT-WRLRT router back to its factory settings.

How to Port Forward Neverwinter Nights 2 on the Sabrent NT-WRLRT

Having trouble forwarding ports on the Sabrent NT-WRLRT?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Sabrent NT-WRLRT Router Port Forwarding Screenshots

Now that you are logged in to your Sabrent NT-WRLRT router you should see the following:

Sabrent NT-WRLRT Screenshot 2

Click the NAT link near the left of the page.

You should now see a new menu. In this new menu, click Port Mapping.

Sabrent NT-WRLRT Screenshot 3

Forward Ports 5120-5300 on the Sabrent NT-WRLRT

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Neverwinter Nights 2 requires you to forward the following ports: 5120-5300. Go ahead and enter the settings shown above into the Port Mapping menu.

No. Private Server Mapping Ports Type Comment Enabled
1. 192.168.1.

When you're finished, click Ok near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for Neverwinter Nights 2 on the Sabrent NT-WRLRT you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Sabrent NT-WRLRT Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.