To setup port forwarding on the Sagem 2804STC router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Sagem 2804STC router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Sagem 2804STC router. By default the IP address should be set to 192.168.1.1.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
Now that you are logged in to your Sagem 2804STC router you should see the following:
Click the NAT link near the left of the page.
You should now see a new menu. In this new menu, click Port Forwarding.
Click the Add button near the center of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Penny Arcade Adventures On the Rain-Slick Precipice of Darkness Episode Two requires you to forward the following ports: 3074. Go ahead and enter the settings shown above into the Virtual Servers menu.
|Select a Service:|
|Server IP Address:|
|External Port Start||External Port End||Protocol||Internal Port Start||Internal Port End|
When you're finished, click Save/Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for XBOX360 Penny Arcade Adventures On the Rain-Slick Precipice of Darkness Episode Two on the Sagem 2804STC you should test to see if your ports are forwarded correctly.